We specialize in Water Towers Industrial Tanks & Logos
High Rise Buildings - Chemical Plants - Factories . Casinos 
Office Structures - Theme Parks Custom Cars
Structural Steel -   Industrial Pipes  - Silos & More

1 - 877-749-5554    pat@greatwesternpainting.com


Acrylic Texture
Anti GraffitiArizona
Arizona Tank Painting
Bad Paints & Effects 
Business Friends
California Tank Painting
Clarifier Tank Painting
Custom Car Painting
Electrostatic Painting
Factory Painting
Fire Proof Painting
Free Gifts
High Rises
Grain Elavators
Hospital Painting
Ind. Paint Manufactures
Industrial Pipe Painting
Industrial Tanks
Lead Encapsulation
Light Pole Painting
Luminescent Paint
Montana Tank Painting
MSHA Certified
North Dakota Tank
Paint Dealers
Safety  & Fall Program
Sand & Hydro Blasting
Shale Gas Fraking
Shot Blasting
Silo painting
Site Map
Structural Steel Painting
Surge Tank Painting
Tank Painting
Texas Tank Painting
Thermal Painting
Utah Tank Painting
Vinyl Wall Covering
Water Tank Inspections
Water Towers

*Thermal Painting


Its like adding a R13+ rating to your walls ceilings
& floors Inside and Outside applications

Before   Huge Heat loss After With
Paint - New windows - Doors  Calking

With Temp-Coat protecting your home, your heat loss in winter is dramatically reduced.  Heat is retained in winter and rejected in summer, making your home
much more comfortable and less expensive to condition.


Pipes - Tanks - Roofs - Containers - Houses -  Rv's



Another Product we use is SuperTherm
be sprayed over large areas or rolled onto smaller surfaces. Coating needn’t be cleaned to stay
effective and lastsmore than 20 years.

Thermal Painting



Construction Chemicals, Building Materials, Paint, Solar Reflective Coating, Nevada, Oklahoma Coating, Adhesive, Waterproofing Products, Floor Coatings, Protective Coatings,
Industrial Paint Manufacturers, Sealants, Isolation Materials, Illinois -Indiana -Iowa -Kansas - Fire Retardant Painting,high rises, thermal, fire proof painting, Roof Coatings,
 Pool Coating,
Thermal coating heat, cold, protection, Exterior Coatings, Commercial painting contractor, industrial painting contractor Mortars, Industrial Paints, Emulsion Paints,
 Cementious Products, Epoxy ,Polyurethane Acrylic Coatings, Concrete,- Mortar,
polymer based, one component,
Epoxy modified cement mortars ,Used as a broadcast floor topping for:-Warehouses,- Cold storage facilities, waterproof exterior coating

1 - 877-749-5554



FFull Service Commercial & Industrial Painting Contractor

Thank you for your interest in our product line.  Per our discussion, considering location and the operating temperature of 175°F, we would recommend a mil thickness of 120 mils be utilized to insulate the tanks.  Attached are photographs of similar tanks coated for BP lubricants in Louisiana.  TEMP-COAT 101 was chosen to replace conventional insulation to combat CUI and issue associated with mass insulation.  Tanks operate at approximately the same temperatures and ambient conditions.  First one of these coated was back in 2011 with them upgrading an average of 2 per year with our coating.  We are also servicing similar tanks globally.  Please see our industrial presentation for your review.


Please do not hesitate to contact us with any additional questions.


Jason Meyer

TEMP-COAT Brand Products




 About TEMP-COAT 101: 

TEMP-COAT 101 is a liquid ceramic insulation capable of insulating surfaces between the range of -80F(-61C) to +350F(177C) with a guarantee that it will insulate and adhere to the surface it insulates.  The thickness of the material is the control factor as to what temperatures the product can control.

TEMP-COAT 101 is approved by over 100 of the Fortune 500 manufacturers and many of their suppliers in the  US.  TEMP-COAT has carried approval from the US Navy, US Coast Guard and Lloyd's Register going back as far as 1996.

 The largest market for TEMP-COAT for the past 10 years has centered around the CUI(Corrosion Under Insulation)issue.  Industries ranging from Oil and Gas to the Maritime industries have embraced TEMP-COAT as a product that can stop corrosion, save energy, reduce labor costs, protect personnel, reduce inspection time and finally extend the life of their assets.  Our product has performed well in heavy industrial and difficult environments for over 18 years. Our client list includes Shell Oil, Dow, DuPont, Union Carbide and Conoco to name a few.  We also serve many of the large military manufacturers such as General Dynamics, Boeing, and Northrop Grumman.

TEMP-COAT is also an excellent choice as an exterior or interior thermal barrier for applications on roof tops and walls.

TEMP-COAT is the oldest name in liquid ceramic coatings.  We offer a 10 year warranty on all of our products and are here to assist with all aspects of your projects.

Please feel free to contact with any questions concerning our product


  Great Western Painting
Commercial & Industrial Painting.
Serving the
U. S. A.
  Water Towers -Tanks - Hotels Chemical plants -
 High Rises - Structural Steel

1 - 877-749-5554  pat@greatwesternpainting.com

 Call Robert 208-371-7757 Estimation Division