*Rust Grip Photos

What Rust Grip Looks like  It needs no Finish Coat  Left  -  Right has finish coat Safety Yellow

Encapsulates Lead-Based Paints and Asbestos - No Sandblasting - Fire Retardant - Protects Steel Cement Wood

Rust Grip with Yellow safety finish coat

As an encapsulant for lead-based paints, rust and other biohazardous materials • As a protective coating on metal, concrete, wood, etc. to prevent deterioration • As a single coat for bridges,

oil platforms, roofs, etc. with minimal surface preparation • As a moisture barrier to stop water penetration, contamination, and mold/mildew

No more rust bleading Easy cleaning

Within an hour of application, Rust Grip® begins to cure, pulling moisture from the air and microscopically penetrating and swelling into the individual pores of the

substrate as it hardens. This moisture absorption cures and anchors the coating, and resists outside air, moisture or minerals attacking the surface and that may cause

 further corrosion or penetration of any kind.Rust Grip® is tested to encapsulate: ✓ Rust ✓ Lead-based paint ✓ Asbestos ✓ Bio-hazardous materials

Rust Grip
Developed by Superior Products International II, Inc (www.spicoatings.com) and distributed by Tuned Coatings, LLC
One Coat, patented encapsulation- interior and exterior- is the coating that acts as a full containment covering. This moisture cured polyurethane coating has been used successfully in the harshest environments; chemical fields, oil fields and rigs, and in areas that demand resistance to the corrosive effects of day to day exposure.

 Rust Grip is tested to encapsulate toxic elements such as existing lead-based paint, asbestos, rust and other bio-hazard materials.
With minimal preparation and no white sand blasting of the surface required, Rust Grip penetrates deep into and seals the pores of the surface. Rust Grip can protect and seal surfaces of steel, aluminum, concrete, wood, fiberglass, and many other substrates. Rust Grip will seal out moisture and air with a permanent membrane and block chemical pollutants that cause corrosion and deterioration. Using Rust Grip replaces traditional 3-part coating system at a fraction of the time and cost!
Rust Grip creates an unsurpassed protective surface, proven time and again through on-site evaluations and real world applications. Rust Grip provides:
Exceptional adhesion- ASTM 5B rating
 Surface tensile strength of 6,780+ psi
 Withstands temperatures up to 325 degrees F
 Certified penetration of 18 layers of existing lead-base paint
Endures 29,700 rub cycles without exposing lead-based paint
 Passed 15,000 hour salt spray test with a perfect score which is equivalent to 40+ years in the real world
 Test “5” on flame spread (0-25 Class A)
 Meets EPA guidelines
 Certified water barrier- ASTM D6904, ASTM D7088
 15-20 year life expectancy in the harshest environments
Rust Grip is reviewed and approved by these organizations:
 USDA Product Safety Branch (approved for use in and around food preparations areas)
 DNV (Det Norske Veritas)
 Louisiana, Tennessee, Mississippi and Georgia Departments of Transportation
 IMO (International Marine Organizations)
ABS (American Bureau of Shipping)
 US Coast Guard

Read More on Lead Base Paint Abatment Encapulation  Page
Or Read PDF